Bending Angle Measurement Systems of Wireless digital protractor for CNC press brake

The Mitutoyo® wireless digital protractor provides the possibility to connect a digital protractor to the CNC wirelessly. The operator measures the angle with the digital protractor and sends the value to the CNC, simply by pressing a button.

The angle correction will be automatically calculated and fine-tuned by the DELEM CNC control.

The protractor, or angle measurement, option enables the possibility to connect a digital protractor tothe RS-232 interface or a USB port of a DA-66T / DA-69T controller. The machine operator can use the protractor to measure the angle of his bended piece. The measured value can be send to the DA-controller by pushing a button; the angle correction will be computed automatically.

The protractor interface is an option that needs a voucher to enable it.

Technical Data

Range: -360° to +360°
Tolerance: ±2′ (±0.03°)
Repeatability: 1’ (0.01°)
Resolution: 1’ (0.01°)
Battery: Lithium
Average duration: 2.000 ore

2019-03-14T10:27:24-06:00 March 14th, 2019|Uncategorized|0 Comments

Leave A Comment

Please Click Here For Inquiry Welcome! Contact Us Here