ACCURL® 160 Ton CNC Press Brake 8 Axis with DELEM DA-69T CNC Controlled features an automatic CNC crowning system for improved quality, a servo driven back gauge system for increased speeds, and a 3D capable graphical control unit to simulate bending sequences and collision points.
- Provides a combination of performance, cost effectiveness and easy to use features
- Outstanding Value! Best brake for the money on the market.
- User friendly DELEM DA66T CNC control unit and Profile 3D software
- Precise bending results
- Tough construction with the same solid framework we use for all of ACCURL CNC Press Brakes
- Large daylight opening allows the entire length of the machine to be put to optimal use
- Designed and built with the objective to help you achieve low cost manufacturing
- Standard 8 axis X1, X2 , R1 , R2 , Z1, Z2, Y1, Y2for CNC Press Brake
- Mono block, welded steel frame rigid to deflection and high tensile with ST44 A1 material.
- Delem DA-69T 3D graphical color controller with Profile T3D offline software.
- BGA-6 for Back gauge system with X1, X2 , R1 , R2 , Z1, Z2 axis driven by AC servo with colored graphics.
- HOERBIGER servo hydraulic system.
- CNC controlled motorized anti-deflection system.
- Hardened and ground standard sectioned top and 4V-Die bottom tools (835 mm section).
- Easy to clamp tool holding system with upper and lower tools.
- Ergonomic user friendly, pendant control panel.
- Back light safety guards (category-4)
- Front side covers with safety switches.
- Synchronization of Y1+Y2 axis provided by linear encoders with 0,01 mm tolerances.
- Foot pedal suitable to CE regulation.
- Sliding front support arms with T slot and mm/inch rulers.
- Electrical panel with cooling system designed to meet CE standards & composed of automation and electrical equipment with SIEMENS branding.
- Graphical controllers; CybelecModEva RA Premium 3D with PC-RA Premium offline software, Delem DA-69T 3D graphical color controller with Profile T3D offline software.
- SICK C4000 advanced finger protections 14 mm (easy programmable Sick software with PC: Blanking, reduced resolution, cascade working etc.)
- Laser protection system for die area, LASERSAFE PCSS, AKAS LASER SAFETY IILC2000, Sick V 4000 (Camera based system), DSPelectric laser safety.
- Laser angle measurement system, with Data-M cobra Laser check system.
- Hydraulic and Dynamic-Hydraulic anti-deflection (crowning) features.
- ACCURL top tool clamping system. Hydraulic top and bottom tool clamping system.
- CNC controlled bending supports (AP1+AP2 axis).
- Hydraulic oil coolant and oil heaters.
- Automatic central lubrication system.
- Special throat depth (500,600,750 mm and above).
- Special top and bottom tools.
- Software options.
- Tandem applications.
- Tool cabinets.