ACCURL B32175 BRAKE SETUP / PRESS BRAKE SETUP.
ACCURL is a “shell” of metal sheet processing equipment.
The price is the most competitive and the quality is recognized by Europe and US as top quality machines.
In August we did a ACCURL B32175 BRAKE SETUP / PRESS BRAKE SETUP.
↓ We have applied RED color paint instead of our standard color according to one of our customer’s requests.
Standard color below ↓ Standard color looks a little more elegant, but can be changed upon request.
↓ Orton arrived in top container.
↓ This facility is L3500 X W1650 X H2580 mm in size that exceeds 10 tons in weight.
We unload it with two forklifts.
↓ Press Brake was moved to the location customer requested using the 16-ton forklift.
↓ Seating and leveling preparation ~~
↓ This equipment is a precision instrument using hydraulic pressure. Therefore, we injected about 300L of hydraulic oil.
↓ Connect AC380V 3 phase power.
↓ Controller Delem / DELEM, Servo Delta / DELTA Electrical parts Schneider / Schneider
↓ Confirm the direction of the motor by turning on the power of the motor.
The motor is “SIMENS” and the hydraulic device is “BOSCH REXROTH”.
↓ Normal power is turned on and then we educate our customers ~~ Controller is very user friendly.
↓ DELEM / DELEM DA66T CNC System
↓ We Lifted the side safety cover and took a photo to show you the perfect door safety system and the safety sensors.
It is highly sophisticated.
↓ this machine consists of 5 axes of backgate equipped with two arms.
X (whole front and rear) + R (whole top and bottom) + Z1 (left and right side) + Z2 (right and left side) + Z5
If you only configure one more axis,
↓ The work area has a bending capacity of 3200 mm and 175 tons.
↓ 2017. 08. month in production ..
↓ After completion, customer, responsible engineer and commemorative shot ~ ~
Of course Amada, Trump, Bystronic products are good.
But the price is very expensive… My mouth dropped when i found out how pricey they were.
