The New Era of Energy Saving and Environment Friendly Press Brake has Finally Arrived
According to Xinhua News Agency, October 24, 2021, The Opinions of the CPC Central Committee and the State Council on Completely, Accurately and Comprehensively Implementing the New Development Concept and Doing a Good Job in Carbon Peak and Carbon Neutralization pointed out targets for 2025, 2030 and 2060 respectively:
“By 2025, an economic system of green, low-carbon and circular development will take shape, and the energy efficiency of key industries will be significantly improved. The energy consumption per unit of GDP will be reduced by 13.5% compared with 2020, the carbon dioxide emission per unit of GDP will be reduced by 18% compared with 2020, the proportion of non-fossil energy consumption will reach about 20%, the forest coverage rate will reach 24.1% and the forest reserve will reach 18 billion cubic meters, laying a solid foundation for achieving carbon peak and carbon neutrality.”
By 2030, remarkable achievements will be made in the comprehensive green transformation of economic and social development, and the energy efficiency of key energy-consuming industries will reach the advanced international level. Energy consumption per unit of GDP has dropped significantly, carbon dioxide emissions per unit of GDP decreased by more than 65% compared with 2005, the proportion of non-fossil energy consumption will reach about 25%, and the total installed capacity of wind and solar power generation will reach more than 1.2 billion kw, the forest coverage rate has reached about 25%, the forest volume has reached 19 billion cubic meters, and the carbon dioxide emissions have reached the peak value with a steady decline.
By 2060, the development of green low carbon cycle economy and clean low-carbon safe efficient energy system will be fully established, energy efficiency will reach the international advanced level, the proportion of non-fossil energy consumption will reach 80%, the goal of carbon neutralization will be smoothly achieved, ecological progress will yield fruitful results, and a new realm of harmonious coexistence between man and nature will be created. ”
According to Carbon Peak and Carbon Neutralization Work Opinions, Accurl will officially display the heavy duty full electric servo press brake (eB Ultra Series) at the Hannover exhibition in August 2022. The models in this exhibition, Hybrid Servo Press Brake EuroMaster B32.175 and New servo electric press brake eB Ultra 35tx1250, combined with the four characteristics of “energy saving, environmental protection, high efficiency and high precision”, break the previous dilemma of high cost of large tonnage full electric servo CNC bending machine, and have obtained the invention patent (Patent No.: ZL 2021308282823.4) (Patent No.: ZL 2020 30304897.3) which granted by the State Intellectual Property Office, etc.
Energy saving
Taking the same electro-hydraulic model as a reference, the monthly electricity consumption of heavy duty full electric servo model is only 25% of other electro-hydraulic servo model.
Environmental protection
The NEW eB Ultra series full electric servo CNC bending machine does not use hydraulic oil, nor does it need regular oil change, so there is no pollution caused by oil leakage, so that the workshop is clean and tidy.
Efficient
The fast full speed conversion and bottom dead center positioning of the heavy duty full electric servo CNC bending machine is controlled by the servo motor and screw rod. The control of the whole cycle is much faster than that of the hydraulic bending machine. Compared with the electro-hydraulic model of the same model, the efficiency will be doubled.
High Precision
High PrecisionThe full electric servo CNC bending machine mainly relies on the servo motor and screw drive to make the sliding plate move up and down and position. After a long term use, the positioning accuracy can still be maintained. In the electro-hydraulic model, the sliding block moves up and down mainly by oil pressure transmission. With the change of oil temperature, the positioning accuracy of the sliding block will also decline, and the repeated positioning accuracy will be difficult to guarantee.
In the long term, the launch of Accurl’s machine will be an important step for the domestic CNC bending machine field to officially enter the “new energy era”. If the manufactured equipment is not accepted by the market and the customer, cannot enter the factory, or play a role in the production line, then the technology is only in vain.
ACCURL has always adhered to the production concept of creating good quality and durable sheet metal processing equipment. Accurl hopes that the heavy duty full electric servo CNC press brake introduced this time will enter more factories and continue to pass on our belief.
